BMW F 650 GS Rider's Manual page 107

Slip spacing bushing 4 into
the left-hand side of the wheel
hub.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the forks, making
sure that the brake disc passes
between the brake pads.
Raise the front wheel, insert
axle 3 and tighten to specified
torque.
Quick-release axle, front,
in axle holder
30 Nm
Remove the front-wheel stand.
Firmly compress the front forks
several times.
Tighten axle clamping screw 2
to the specified torque.
Clamp of quick-release
axle
19 Nm
with BMW Motorrad ABS
Insert the ABS sensor into its
bore and install screw 1.
The cable of the ABS
sensor could chafe through
if it comes into contact with the
brake disc.
Make sure that the ABS sensor
cable is routed correctly.
Make sure that the ABS sensor
cable is routed as shown
here.
Remove the auxiliary stand, if
installed beforehand.
OE
8
105
z