Table of Contents
Advertisement
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK,
IMPORTANT SAFETY INSTRUCTIONS
WARNING – To reduce the risk of FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
1. Do not operate the portable luminaire with a missing
or damaged guard or lamp containment barrier.
2. Avoid electric shock. Do not use with an extension
cord near water or where water may accumulate.
Keep lamp at least 16 feet (5m) from pools
and spas. Keep plugs and receptacles dry.
Use only on GFCI-protected circuits.
Do not submerge the Light in water.
3. The Light is not waterproof. Use extreme
caution in any wet location.
4. Do not obstruct walkways or
common areas with the cord.
5. This product is not intended for use in a
residence or to be mounted in a cabinet.
This product is not suitable for recessed
installation in ceilings or on buildings.
6. Wear ANSI-approved goggles during setup and use.
7. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
Page 2
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
Indicates a hazardous situation which, if not avoided,
Indicates a hazardous situation which, if not avoided,
Addresses practices not related to personal injury.
OR INJURY TO PERSONS.
For technical questions, please call 1-888-866-5797.
will result in death or serious injury.
could result in death or serious injury.
could result in minor or moderate injury.
8. Do not operate the Light in explosive atmospheres,
such as in the presence of flammable liquids,
gases or dust. The Light generates sparks
which may ignite the dust or fumes.
9. The Light's plug must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with the Light. Unmodified plugs and
matching outlets will reduce risk of electric shock.
10. Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the Light.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled
cords increase the risk of electric shock.
11. Maintain the Light. Check for breakage of
parts and any other condition that may affect
the Light's operation. If damaged, have it
repaired before use. Many accidents are
caused by poorly maintained items.
12. Maintain labels and nameplates on the
Light. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Item 66308
Advertisement
Table of Contents
