1. Manuals
  2. Brands
  3. Luminar Manuals
  4. Work Light
  5. WORK 66274
  6. Owner's manual & safety instructions

Luminar WORK 66274 Owner's Manual & Safety Instructions

3 watt/120 volt 28 bulb led work light
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
3 WATT/120 VOLT
28 BULB
LED WORK LIGHT
Email our technical support at: productsupport@harborfreight.com
REV 13k
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
MODEL 66274

Advertisement

Table of Contents
loading

Related Manuals for Luminar WORK 66274

Summary of Contents for Luminar WORK 66274

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Instructions Pertaining To A Risk Of Fire, Electric Shock, Or Injury To Persons

    WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
  • Page 3 unreadable or missing, contact Harbor • Any power cord must be properly Freight Tools for a replacement. grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it 14. Do not leave the Light unattended when it is plugged prevents sustained electrical shock.

  • Page 4: Extension Cords

    Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the Light. Never remove the grounding prong from the plug.

  • Page 5: Specifications

    6. If you are using an extension cord outdoors, make TABLE A: RECOMMENDED sure it is marked with the suffix “W-A” (“W” in MINIMUM WIRE GAUGE FOR Canada) to indicate it is acceptable for outdoor use. EXTENSION CORDS* (120 VOLT) 7.

  • Page 6: Initial Set Up Instructions

    Set Up Instructions Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual, including all text under subheadings therein before setup or use of this product. Initial Set Up Instructions Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

  • Page 7: Please Read The Following Carefully

    PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

  • Page 8: Limited 90-Day Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

66274

Table of Contents