Connecting Poe (Power Over Ethernet) - D-Link DWL-7700AP User Manual

Section 2 - Installation
Step 1 Connect one end of an Ethernet cable (included with your package) to the LAN port on the DWL-7700AP and
the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE base unit.
Step 2
Connect another Ethernet cable from the
PC.
Step 3
Attach the power adapter to the connector on the PoE base unit. Attach the power cord to the power adapter
and into an electrical outlet.
D-Link DWL-7700AP User Manual

Connecting PoE (Power over Ethernet)

P+DATA IN port on the PoE base unit to your router/switch or to a
12