Front-Wheel Stand - BMW F 800 GS Rider's Manual

8
102
Install right adjusting plate 5.
z
Install nut 2, but do not tighten
it at this point.
Seat the speed sensor in the
holder and install screw 1 of
the speed sensor.
Adjust the chain tension
( 94)
Remove the auxiliary stand, if
installed beforehand.

Front-wheel stand

Installing front wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support the motorcycle
without the assistance of an
auxiliary stand. A motorcycle
resting only on the front wheel
stand and the rear wheel can
topple.
Place the motorcycle on an aux-
iliary stand before lifting the front
wheel with the BMW Motorrad

front-wheel stand.

Place the motorcycle on a suit-
able auxiliary stand.
OE
with centre stand
Place the motorcycle on its
centre stand.
Use basic stand (0 402 241)
with front-wheel adapter
(0 402 242).