Cobra CPI 880 Operating Instructions Manual page 9

3. Connect cable to the power source:
a. Connect the cable from the Negative {Black) Tenninal of
inverter to the Negative Tenninal of
the power source. Make a secure connection.
b. Connect the cable from the Positive {Red) Terminal of
the inverter to the Positive Tenninal of the power source
(the battery's main fuse or the battery selector switch, if
,~,.
you are using one). Make a secure connection.
You might observe a spark when you make this connection since
current can flow to charge capacitors in the inverter. -•
All power connections to your Cobra inverter must
be Positive
to
Positive and Negative
to
Negative.
Connect Power Source
i
Nothing Comes Close to a Cobra®
~