Sleep Timer Setting; Display Function - Audiovox CD6229i Instruction Manual

Cd micro system with docking for ipod

Hide thumbs

Table Of Contents

Table of Contents

The timer function will turn the unit on at a preset time.

To Set Timer

1. In standby mode, press and hold the TIMER button on the remote control until the TIMER indicator

blinks.

2. Press and hold the PROG/MEM/

3. Press the

confirm. The minute digits blink.

4. Press the

confirm.

5. Press the FUNCTION button to select the timer mode (RADIO, CD or iPod).

The "

", " iPod " or "

6. Press the VOL-/+ buttons to adjust the volume levels.

7. Press the PROG/MEM/

8. The unit will wake up to "RADIO", " iPod" or "CD" when the timer reaches the preset time.

Note: For the FM/AM tuner timer, it will wake up to the last station you tuned in.

To Cancel Timer

•

Press and hold the TIMER button on the remote control until the TIMER indicator goes out.

The sleep timer automatically turns the unit off after a certain time.

1. While the unit is on, press the SLEEP button and " 00 " appears on the display.

2. Press the SLEEP button repeatedly to select the desired sleep time as below:

3. After setting a desired sleep time, the "

4. The unit will automatically turn off once it counts down the sleep time.

To clear the preset sleep time press the SLEEP button until " 00 " appears. The "

•

disappears.

CD Mode

1. During playback, press the DISPLAY button repeatedly to shuffle between the CD playback mode and

the current time.

2. When stopped, press the DISPLAY button to shuffle between the total number of CD tracks and the

current time.

Radio Mode

• Press the DISPLAY button to shuffle between the current radio station and the current time.

Note: In iPod mode, the current time is always shown on the display.

TIMER SETTING

button until the hour digits blink.

button to adjust the desired hours then press the PROG/MEM/

button to adjust the desired minutes then press the PROG/MEM/

" icon will be shown on the display.

button to confirm. The TIMER indicator will stop blinking and remain on.