Panel (U5); Panel (U1B) - Sony SRX-R320 Installation Manual

1-1-6. Panel (U5)

1. Remove the panel (U7) block assembly. (Refer to Section 1-1-2.)
2. Remove the panel (U6). (Refer to Section 1-1-5.)
3. Remove the three screws, then remove the panel (U5)
in the direction of arrow.
4. To install, reverse the removal procedure.

1-1-7. Panel (U1B)

1. Remove the panel (U7) block assembly. (Refer to Section 1-1-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-1-3.)
3. Remove the panel (U6). (Refer to Section 1-1-5.)
4. Remove the six screws, then lower the panel (U1B) in
the direction of arrow .
5. Remove the panel (U1B) in the direction of arrow .
6. To install, reverse the removal procedure.
1-4
Panel (U5)
Screws
Fig. 1-1-6
Screws
Panel (U1B)

Fig. 1-1-7

Screws
SRX-R320