Maintenance And Cleaning - Bosch GDA 280 E Instruction Manual

Environmental protection
Recycle raw materials instead of disposing
as waste
Machine, accessories and packaging should be
sorted for environment-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.

Maintenance and Cleaning

Before working on machine disconnect from
power supply by removing plug from socket.
Always keep the machine and the ventilation
slots clean.
If the machine should happen to fail despite the
care taken in manufacture and testing, repair
should be carried out by an authorised customer
services agent for Bosch power tools.
For all correspondence and spare parts orders,
always include the 10 digit order number of the
machine!
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2 wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the plug is cut off of
the cable of this machine, it must be disposed of
safely and not left unattended.
To be fitted
by qualified
professional only
Subject to change
Guarantee
We guarantee Bosch appliances in accordance
with statutory/country-specific regulations (proof
of purchase by invoice or delivery note).
Damage attributable to normal wear and tear,
overload or improper handling will be excluded
from the guarantee.
In case of complaint please send the machine,
undismantled, to your dealer or the Bosch Ser-
vice Centre for electric power tools.
Service
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Service
................................................
Advice line
........................................
FAX
...............................................................
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Service
....................................................
FAX
...................................................................
Declaration of conformity
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardization
EN 50 144, EN 55 014, EN 61 000-3, HD 400
according to the provisions of the regulations
73/23/EEC, 89/336/EEC, 89/392/EEC.
96
Dr. Alfred Odendahl
Robert Bosch GmbH
Geschäftsbereich Elektrowerkzeuge
(08 95) 83 86 81
(08 95) 83 84 02
(08 95) 83 87 89
(01) 45 15 211
(01) 45 17 127
documents:
Dr. Eckerhard Strötgen
13