Safety Instructions - Beko P7 Service Manual

Important notes on safety!
Your safety and the safety of others is important. Please, therefore, ensure you read the Safety
instructions before you operate this television.

Safety instructions

! Read all the safety instructions before first use of your TV.
• Position the television so that direct light does not fall on the screen. Excessive light
will cause a washed out effect.
• Position the power supply lead and other leads so that they are not likely to be walked
on or pinched by things placed on or against them.
• Do not place objects filled with liquid such as vase or flower pot near the television.
• Do not expose the TV to dripping or splashing of liquids.
• Do not place naked flame sources such as lighted candles on the TV set.
• Make sure that no naked flame sources, such as lighted candles, are placed on top
of the appliance.
• Do not place the television near heat sources such as radiators, ovens, stoves, etc.
• Do not push, hit or screw the screen of your product.
• The heat built up in the set escapes through ventilation holes, so do not cover the set
by drapes, clothes etc. that may block air circulation. Do not place the television on
carpet or soft furnishings.
• Never let children push anything into the holes or slots on the case.
• Clean the TV Screen using a slightly damp cloth or chamois leather. Never use abrasive
cleaning agents like liquid or aerosol cleaners.
• Remove the mains plug from the socket outlet while cleaning.
• Never apply pressure on the screen when cleaning.
• Never put your screen on hard objects. Your PDP screen may be damaged.
• If you wish to place the television on a shelf or in a wall unit always ensure there is a
10
minimum air gap of 10 cm around the top, sides and rear of the television, to assist
cm
ventilation.
• Your TV set is designed to operate with mains voltages 230V AC; 50Hz. Do not connect
your TV set to power sources other than the mains supply.
230
• If you don't use the television for a long period, please remove the mains plug from wall
socket outlet.
• Your TV set is designed as a CLASS I apparatus, the TV set has to be connected to a
mains socket outlet with a protective earthing connection.
•To fully disconnect the TV, the mains plug is used as a disconnecting device and therefore
shall be readily operable.