Table of Contents
Advertisement
The setup of your television:
Setting up the Sound Menu
You can set the volume with the " VOL+" and
"VOL -" buttons on the television or the ( ) , ( )
buttons on the remote control.
You can control the other sound settings by
entering the Sound menu For this application all
you need to do is press the ( ) button of your
remote control. Select the Sound menu with the
direction ( ) button. You can reach this menu
directly by pressing the Red (
the functions from the headings in this menu.
Effect: If you want to add depth to the sound of
the program you watch, select Spatial with the
( ) button.
Television transmitters have different sound levels.
This can be noticed from the different volume
levels that can be heard while switching from one
program to another. Using the right/left movement
( )/( ) buttons switch to Open. The AVL
(Automatic Volume Limiting) function maintains
the same sound level as you switch from program
to program. To cancel choose Closed.
Balance: To adjust the volume balance between
the left and right speakers to the desired level,
select the Balance bar using the down (
Using the right/left movement ( )/( ) buttons
adjust the balance.
Sound Type: The program you watch might be
stereo or in two different languages. Using the
right/left keys ( )/( ) in this menu you can select
Mono/Stereo or Dual-I/Dual-II language.
) button. Select
Equalizer: Selecting the Equalizer mark press
(
will be displayed. You can selected with the
right/left ( / ) buttons, pre-programed,
unchangeable sound enhancing Music, Sport,
Cinema and Speech, User settings for the
programs you are watching. These can be adjusted
by you in the User selection. To adjust the User
selection; select the User selection and press the
(
with the (
120Hz, 500Hz, 1.5KHz, 5KHz and 10KHz
frequency bands with ( ) and ( ) buttons. Storing
the adjustment levels in memory press the menu
button to exit the user option.
You can exit the equalizer function pressing
the( )button again.
Please note: You can choose the equalizer
position directly from the (
remote control.
You can exit the equalizer function pressing the
( ) button at any time.
) or ( ) button. The equalizer setting function
) button.You can adjust the frequency levels
) and (
) buttons. You can select
) button.
) button of your
Advertisement
Table of Contents
