Setting Up - Premio Computer Aries User Manual

2 Premio System Manual

Setting Up

To set up your Premio system, simply connect your monitor, the mouse,
the keyboard, and any additional components you want to use to the
system unit.
Follow these easy steps:
Power Connector
Mouse Connector
Keyboard Connector
USB Connector
Serial-1 Connector
Serial-2 Connector
Parallel Connector
Sound Card Connectors
Video Connector
Modem Connectors
Your Premio system is now ready to use. To start the system, turn on your
monitor's power switch and then press the system power switch as shown
on the next page.
1
2
3
4
5
6
Plug your monitor's power cord into a power outlet.
7
Attach the female end of the system power cord to the
system unit's power connector, and then plug the other end
of the cord into a power outlet.
Attach your monitor's video cable
to the video connector.
Attach the mouse cable to the mouse
connector.
Attach the keyboard cable to the
keyboard connector.
Attach the cables for any additional
components, such as a printer,
scanner, or modem, to the respective
parallel, serial, or universal serial
bus (USB) connector, as directed in
the component's manual.
If your system is equipped for
multimedia, attach your speakers
and microphone to the sound card
connectors.