Table of Contents
Advertisement
When rotating P235/50R17 size tires or
255/45ZR18 size tires, always use the correct
rotation pattern shown here.
If the vehicle has a compact spare tire, do not
include the compact spare tire in the tire rotation.
After the tires have been rotated, adjust the front
and rear inflation pressures as shown on the Tire
and Loading Information label. See Inflation - Tire
Pressure on page 6 60 and Loading the Vehicle on
page 5 23.
6-68
Ofrecido por www.electromanuales.com
Reset the Tire Pressure Monitor System. See Tire
Pressure Monitor Operation on page 6 64.
Make certain that all wheel nuts are properly
tightened. See Wheel Nut Torque under
Capacities and Specifications on page 6 130.
WARNING:
Rust or dirt on a wheel, or on the parts to
which it is fastened, can make wheel nuts
become loose after time. The wheel could
come off and cause an accident. When you
change a wheel, remove any rust or dirt from
places where the wheel attaches to the
vehicle. In an emergency, you can use a
cloth or a paper towel to do this; but be sure
to use a scraper or wire brush later,
if needed, to get all the rust or dirt off.
See Changing a Flat Tire on page 6 96.
Advertisement
Chapters
Table of Contents
