Polaris PREDATOR 90 Owner's Manual page 136

Handlebar Adjustment
The handlebars can be adjusted for rider
preference.
1. Remove the pod to access the handlebar bolts.
2. Loosen the four bolts (A).
3. Adjust the handlebar to the desired height. Be
sure the handlebars do not hit the gas tank or
any other part of the machine when turned
fully to the left or right.
4. Lightly tighten each bolt equally to prevent
uneven gaps in the block.
5. Torque the handlebar adjuster block bolts to
7.3 ft. lbs. (10 Nm).
Maintenance
A
133