Detecting System Information With Pc-Doctor; Power System Checkout - Lenovo ThinkPad Z61t Maintenance Manual

Checkout guide
4. Run the applicable function test.
5. Follow the instructions on the screen. If there is a problem, PC-Doctor shows
6. To exit the test, select Quit — Exit Diag.
Note: After running PC-Doctor, check the time and date on the system and reset

Detecting system information with PC-Doctor

PC-Doctor can detect the following system information:
Hardware Info
v System Configuration
v Memory Contents
v Physical Disk Drives
v Logical Disk Drives
v VGA Information
v IDE Drive Info
v PCI Information
v PNPISA Info
v SMBIOS Info
v VESA LCD Info
v Hardware Events Log
Utility
v Run External Tests
v Surface Scan Hard Disk
v Benchmark System
v DOS Shell
v Tech Support Form
v Battery Rundown
v View Test Log
v Print Log
v Save Log
v Full Erase Hard Drive
v Quick Erase Hard Drive

Power system checkout

To verify a symptom, do the following:
1. Turn off the computer.
2. Remove the battery pack.
3. Connect the ac adapter.
4. Check that power is supplied when you turn on the computer.
28
MT 9440, 9441, 9442, 9443, 9448
Notes:
v In the Keyboard test in Interactive Tests, the Fn key should be held down for
at least 2 seconds; otherwise, it cannot be sensed.
v Video Adapter test supports only the LCD display on the ThinkPad computer.
If you have an external monitor attached to your computer, detach it before
running PC-Doctor for DOS.
v To test Serial Ports or Parallel Ports, the ThinkPad computer must be attached
to the ThinkPad Advanced Dock or ThinkPad Advanced Mini Dock.
messages describing it.
To cancel the test, press Esc.
them if they are incorrect.