Table of Contents
Advertisement
Checkout guide
4. Run the applicable function test.
5. Follow the instructions on the screen. If there is a problem, PC-Doctor shows
6. To exit the test, select Quit — Exit Diag.
Note: After running PC-Doctor, check the time and date on the system and reset
Detecting system information with PC-Doctor
PC-Doctor can detect the following system information:
Hardware Info
v System Configuration
v Memory Contents
v Physical Disk Drives
v Logical Disk Drives
v VGA Information
v IDE Drive Info
v PCI Information
v PNPISA Info
v SMBIOS Info
v VESA LCD Info
v Hardware Events Log
28
MT 1951, 1952, 1953, 1954, 1955, 1956, 2007, 2008, 2009, 2613, 2623, 2637
The options on the test menu are as follows:
Diagnostics
v Run Normal Test
v Run Quick Test
v CPU/Coprocessor
v Systemboard
v Video Adapter
v Serial Ports
v Parallel Ports
v Fixed Disks
v Diskette Drives
v Other Devices
v ThinkPad Devices
v Communication
v Wireless LAN
v Memory Test – Full
v Memory Test – Quick
Notes:
v In the Keyboard test in Interactive Tests, the Fn key should be held down for
at least 2 seconds; otherwise, it cannot be sensed.
v Video Adapter test supports only the LCD display on the ThinkPad computer.
If you have an external monitor attached to your computer, detach it before
running PC-Doctor for DOS.
v To test Serial Ports or Parallel Ports, the ThinkPad computer must be attached
to the ThinkPad Advanced Dock or ThinkPad Advanced Mini Dock.
messages describing it.
To cancel the test, press Esc.
them if they are incorrect.
Interactive Tests
v Keyboard
v Video
v Internal Speaker
v Mouse
v Diskette
v System Load
v CD-ROM/DVD Test
v Intel Wireless Radio
Advertisement
Table of Contents
