Table of Contents
Advertisement
3.
Now remove your motherboard by lifting it up.
4.
Install standoffs as needed and put the motherboard back in.
5.
Screw in your motherboard to the standoffs with the provided Phillips-head screws.
Caution: Make sure to remove any unused motherboard standoffs. They may come into contact
with the back of the motherboard and may electrify your case exterior if left connected.
Step 5: Screwing in the motherboard after standoffs are installed
12
Lift your motherboard out to install the standoffs.
- Quick Links:
- Case Specifications
Hide quick links:
Advertisement
Table of Contents
