Vector PC-Duo Gateway Manual page 75

To specify the location where the PC-Duo Gateway saves recorded sessions, type a full
path in the
Recording File Directory
Files\Vector Networks\PC-Duo Gateway\Data\Recordings.
In the Master Playback window, when you position the slider forward or backward within
a recording, the playback must resume from the nearest checkpoint, which provides a
complete picture of the Host screen. The more checkpoints you have within a recording,
the quicker it is to locate a particular point within the recording. However, adding too
many checkpoints can drastically increase network traffic and cause the recording files to
become very large.

To set the
Automatic Checkpoint Generation

The
Minimum data size (KB) before criteria checked
screen data must be generated in a recording before the PC-Duo Gateway will
begin to check the other two Automatic Checkpoint criteria.

The
Maximum data size (KB) after minimum
data than can be recorded before the next checkpoint must be generated.
text box. The default is C:\Program
, type a value for the following settings:
field specifies the largest amount of
Gateway Configuration
field specifies how much
75