Vector PC-Duo Gateway Manual page 69

Click to add an address to your TCP/IP or SSL policy exception list. Depending on
Add
your policy, either the Grant Access On window or the Deny Access On window appears.
Specify one of the following address exception options:

Select
Single computer (at one IP address)
SSL policy.

Select
Group of computers (by subnet mask)
SSL policy for a group of addresses. You can specify the group of addresses via a single
address and a subnet mask.

Select
Group of computers (by start address and count)
a group of computers by counting addresses from one starting address.

Select
Single computer (at one IPV6 address)
or SSL policy.

Select
Group of computers (by IPV6 subnet mask)
TCP/IP or SSL policy for a group of addresses. You can specify the group of addresses
via a single address and a subnet mask.
For the SSL protocol, click
Certificates are selected and managed using the PC-Duo Gateway Certificate Manager.
to specify one exception to your TCP/IP or
to specify an exception to your TCP/IP or
to specify one exception to your TCP/IP
to view the currently installed security certificate.
View Cert
Gateway Configuration
to specify the exception rule for
to specify an exception to your
69