Configuration; Web-Based Configuration Utility - D-Link DWL-2700AP User Manual

D-link wireless g outdoor ap/bridge

Hide thumbs Also See for DWL-2700AP:

Table of Contents

This section will show you how to configure your D-Link wireless access point using the

web-based configuration utility. If you would like to use the AP Manager II software, please

refer to the documentation located on the D-Link CD.

To configure the DWL-2700AP, use a computer which is connected to the DWL-2700AP with an Ethernet

cable (see the Network Layout diagram).

First, disable the Access the Internet using a proxy server function. To disable this function, go to

Control Panel > Internet Options > Connections > LAN Settings and uncheck the enable box.

Start your web browser program and type the IP address of the DWL-2700AP in the address field

(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DWL-2700AP and your

computer are in the same subnet.

After the connection is established, you will see the user identification window as shown.

Note: If you have changed the default IP address assigned to the DWL-2700AP, make sure to enter the

correct IP address.

• Type admin in the User Name field

• Leave the Password field blank

• Click OK

Note: If you have changed the password, make sure to enter the correct password.

D-Link DWL-2700AP User Manual

Configuration

Table of Contents