End Of Operation - Delta MD 14029 Instruction Manual

Rinse the plate in warm soapy water or in a dishwasher.
• Then dry the rotary plate thoroughly with a soft cloth. If you remove the
rotary plate from the rotary hub then ensure that it has been replaced
correctly after cleaning.
• The rotary hub and the base of the microwave should be cleaned regularly to
prevent loud noises from occurring.
• Simply wipe the base of the device with a mild cleaning solution. The rotary
hub can be cleaned in mild soapy water or in a dishwasher. Any remaining
aromas in the microwave oven can be removed by placing a glass of water
together with the juice and rind of a lemon in a deep container suitable for
microwave cooking and then heating it in the microwave for 5 minutes. Finally,
wipe the microwave thoroughly and dry it with a soft cloth.
• If you have to replace the light in the microwave oven, please contact a
qualified specialist workshop or the Medion Service Centre.
10

End of operation

After the end of the cooking process, the time will be displayed in the display
field. You can then open the door and remove the food. The device switches itself
off automatically when the cooking process is finished. Check that the interior
lighting for the microwave oven is switched on when the door is opened and then
automatically goes out after a while.
If you do not use the device for a long period of time, pull out the mains plug and
store the device in a dry location.
Helpline No. UK/ Northern Ireland 0871 37 61 020 (calls are charged at 7p/min from
a standard landline; calls from mobiles could be higher) Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
27