Timer Function - Delta MD 14029 Instruction Manual

Using several programmes
The device can carry out several programmes in succession. Up to 2 sequences
can be programmed to run automatically. For example, you can firstly defrost the
food and then cook it directly afterwards.
Press the

The display will show dEF1 or dEF2 depending on the selection.
 Turn the control knob to set the defrosting time or the weight.
 Press the
 Press the
 Turn the control knob to set the cooking time.
 Press the
Please note!
The automatic programmes can not be selected when using
this function.

Timer function

You can programme the microwave so that the cooking process starts at a
predetermined time.
Please note!
The timer function can only be used when the time has been
set (see page 19).
Up to two cooking programmes can be set using the timer function.
 Firstly select the desired programme.
 Then press the
The digits indicating the hours will flash.
 Turn the control knob to set the hours.
 Press the
The digits indicating the minutes will flash.
Turn the control knob to set the minutes.

 Confirm your selection by pressing the
The activated timer function will be indicated by "
Once the entered starting time has been reached, the microwave will emit two
acoustic signals (beeps) and start the cooking process.
Helpline No. UK/ Northern Ireland 0871 37 61 020 (calls are charged at 7p/min from
a standard landline; calls from mobiles could be higher) Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
button. Select defrosting by weight or time (see page 21).
button and select the desired output using the control knob.
button to confirm the selection.
button to start both programmes.
button.
button.
button.
" being lit up on the display.
:
22