Before The First Use Of The Microwave - Delta MD 14029 Instruction Manual

8

Before the first use of the microwave

Setting up the device
Ensure that all packaging materials have been removed from inside the device and
the interior of the door.
Warning!
The panel in front of the magnetron on the right
side of the interior cooking area is not part of the packaging
and must not be removed!
Check the microwave for any damage – e.g. if the door is
crooked or bent, door seals and other seals are damaged,
hinges and the closing mechanism are defective or loose, or if
the interior of the device or the door are dented or damaged.
If you discover any damage, do not use the microwave. In this
case please contact our Medion Service Centre.
• Do not place the microwave near to any heat sources, in a location prone
to wetness or high humidity, or in the immediate vicinity of inflammable
materials.
• The feet must not be removed.
Caution!
The microwave has been designed for household use and may
not be used outside!
• Connect the microwave using the mains plug to a convenient and easily
accessible 230 V~50 Hz safety socket.
Cleaning the device for the first time
 In order to remove the dust residue from the packaging and any other
possible residues from the manufacturing process, wipe out the interior and
the inner side of the viewing window with a slightly moist, soft cloth before
using the device for the first time. Ensure that no liquids penetrate into the
device and dry the surfaces completely afterwards.
 Clean the glass rotary plate and the roller ring in warm water with a little
washing up liquid and then dry off these parts completely.
Helpline No. UK/ Northern Ireland 0871 37 61 020 (calls are charged at 7p/min from
a standard landline; calls from mobiles could be higher) Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
15