Options During A Call; Write Text; Text Modes; Traditional Text Input - Nokia 7510 Supernova User Manual

Hide thumbs Also See for 7510 Supernova:
Table of Contents

Advertisement

Available languages

Available languages

1. In the standby mode, press and hold the right selection key. A short tone sounds,
and Speak after the tone is displayed.
2. Say the name of the contact you want to dial. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of the first match
on the list. If it is not the correct command, scroll to another entry.

Options during a call

Many of the options that you can use during a call are network services. For availability,
contact your service provider.
During a call, select Options. The available options may include the following:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice
clarity, Loudspeaker or Handset.
Network options are Answer or Reject, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
● Send DTMF — to send tone strings
● Swap — to switch between the active call and the call on hold
● Transfer — to connect a call on hold to an active call and disconnect yourself
● Conference — to make a conference call
● Private call — to have a private discussion in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.

4. Write text

Text modes

To enter text (for example, when writing messages) you can use traditional or predictive
text input.
When you write text, press and hold Options to switch between traditional text input,
indicated by
, and predictive text input, indicated by
supported by predictive text input.
The character cases are indicated by
To change the character case, press #. To change from the letter to number mode,
indicated by
, press and hold #, and select Number mode. To change from the
number to the letter mode, press and hold #.
To set the writing language, select Options > Writing language.

Traditional text input

Press a number key, 2-9, repeatedly until the desired character appears. The available
characters depend on the selected writing language.
20
,
, and
.
© 2008 Nokia. All rights reserved.
. Not all languages are

Advertisement

Table of Contents
loading

Table of Contents