Table of Contents
Advertisement
4. Internal Component Layout
30~75KVA
1. Mains input power supply switch.
2. Bypass switch (when changing over bypass switch, please firstly interrupt the machine equipment power
supply and then interrupt the master power supply. If there are two switches needed to change over
simultaneously, then the right one is through the automatic voltage regulator and the left one is not , and
after the master power supply switch is pressed on then successively to press the 「ON」 power supply switch
on the panel)
3.
Input electrical connection terminal.
4. Output electrical connection terminal.
(three or four points referred to connection diagram)
(three or four points referred to connection diagram)
- 5 -
A.V.R. operation manual
Advertisement
Table of Contents
