General Points For Attention; Product Inspection - BPC PowerMaster User Manual

1. Important Notices
1. Read instructions carefully before operating the AVR.
2. All operating instructions should be followed.
3. Do not overload the maximum capacity of the installation.
Do not insert any object into ventilation holes or other openings.
To reduce the risk of fire or electric shock, install in temperature and humidity controlled indoor area free
of conductive contaminants.
To reduce the risk of fire, replace fuses with the same type and rating when necessary.
Only qualified personnel should install or service AVR units.
Risk of electric shock, do not remove cover. No user serviceable parts inside, refer servicing to
qualified service personnel.

2. Product inspection

Each Automatic Voltage Regulator has passed through the most stringent quality control tests at the factory.
When the Automatic Voltage Regulator arrives at the customer's site, please immediately check the following:
1. Do the model, capacity, voltage setting and serial number of the Automatic Voltage Regulator match with
that ordered by the end user?
2. Check that the Automatic Voltage Regulator has not incurred any physical damage due to transport. Any
damage should be reported to the freight forwarding company and BPC should be connected immediately.
Under no circumstances should you try to connect a damaged Automatic Voltage Regulator into any power
source.
WARNING!
CAUTION!
- 3 -
A.V.R. operation manual