Operation - Makita EVH2000 Instruction Manual

Power sprayer
Hide thumbs Also See for EVH2000:
Table of Contents

Advertisement

Available languages

Available languages

OPERATION

1. Start the engine (see page 12)
2. After starting the engine, mount the power sprayer on your back and adjust the shoulder straps so as to keep the unit as close to your body
as possible. Put the engine in idle and take care not to tilt the power sprayer unit too much.
Adjust straps as follows.
1) Loosening straps:
2) Tightening straps:
Note:
If straps do not carry any weight, they can be tightened with
relative ease.
3. Serect the desired opereting position the pressure dial.
4. Move the throttle lever at the desired position with the nozzle lever moved
while observing the spray.
When using the power sprayer always spray downwind. Take special care to avoid situations where sprayed chemicals are blown back
towards you.
Raise buckle
Pull on the end of the strap attached to the power
sprayer.
Pull on the free end of the strap.
LOW PRESSURE
PRESSURE DIAL
SLOW
CAUTION
15
Buckle
Tighten
Loosen
HIGH PRESSURE
FAST
Throttle lever
NOZZLE LEVER
OPEN
CLOSED

Advertisement

Table of Contents
loading

Table of Contents