Table of Contents
Advertisement
Getting Started
2. Connect the adapter to a standard AC wall outlet.
3. When charging is finished, disconnect the
adapter from the power outlet and from the
phone by pressing the gray tabs on both sides of
the connector and pulling the connector out.
Note: Do not remove the battery from the phone
while it is charging without first unplugging the
adapter. If you do so, the phone may be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and
a message will be repeated at regular intervals on
the display:
**Warning**
Low Battery
Menu
When the battery becomes too weak for the phone
to operate, it switches off automatically.
20
Name
Switching the Phone On/Off
1. Open the phone.
2. Hold down the
switches on.
3. If the phone asks for a password, key in the
password and press the OK soft key. The phone
password is factory set to 00000000. For further
details, see page 123.
4. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 124.
The phone searches for your network and when
it finds it, the idle screen, illustrated below,
appears on each display. Now, you can make or
receive a call.
Service Provider
05:17
Sat 02 Oct
Menu
Name
Note: The display language is factory set to
English. To change the language, use the
Language menu option (Menu 4.5); for
further details, refer to page 84.
5. When you wish to switch the phone off, hold
down the
key until the power-off image is
displayed.
Getting Started
key until the phone
05:17
Sat/02
21
Advertisement
Table of Contents
