We recommend listening at low levels while driving your car. JBL accepts no liability for hearing loss, bodily injury or property damage resulting from use or misuse of this product.
Page 3
BP150.1, BP300.1, BP600.1, BP1200.1 FUSES 40A x 3 — — + BATT SPEAKER OUTPUTS INPUT LEVEL FREQ — — — — 4V 250mV 32Hz 320Hz HIGH LEVEL HIGH LEVEL FRONT INPUTS REAR INPUTS Note: Drawing is provided only for connector, control and fuse location.
Page 4
4.2mH 265µF 3.6mH 227µF 3.2mH 198µF BP150.1, BP300.1, BP600.1, BP1200.1 Connect the woofers to the amplifier, observing proper polarity. Although these amplifiers have a single channel, duplicate positive and negative connec- tors are provided to facilitate the connec- tion of multiple woofers.
If your radio has only speaker-level outputs, you The BP150.1, BP300.1, BP600.1 and BP1200.1 are designed to provide con- should connect them to the speaker-level input connectors, observing proper stant bass regardless of the position of the source unit’s front-to-rear fader posi-...
Troubleshooting Symptom No Audio (Red LED flashes every four seconds) No Audio (Power indicator is off) No Audio (Green power LED is lit) No Audio (Red LED stays lit) Distorted Audio Music lacks “punch” Likely Cause Solution Short circuit in speaker or speaker wire. Disconnect speaker leads one at a time to determine which speaker or wire is shorted or defective.
Specifications P80.2, P180.2, P80.4, BP150.1, BP300.1, BP600.1, BP1200.1 Specifications P80.2 P180.2 Power Output, 40W x 2 90W x 2 4 ohms Power Output, 80W x 2 180W x 2 2 ohms Power Output, 160W x 2 360W x 1 4 ohms Bridged...