Pioneer MJ-D508 Service Manual page 3

THIS PIONEER APPARATUS CONTAINS
LASER OF CLASS 1.
SERVICING OPERATION OF THE APPARATUS
S H O U L D B E D O N E B Y A S P E C I A L L Y
INSTRUCTED PERSON.
LABEL CHECK
IMPORTANT
MYXJ and MYXJGR/FR types
MYXJ and MYXJGR/FR types
NVXJ type
LASER DIODE CHARACTERISTICS
MAXIMUM OUTPUT POWER: 27.4 mW
WAVELENGTH: 785 nm
Additional Laser Caution
Control method of the current through a laser diode.
The resistor R105 on the CORD MAIN UNIT ASSY (For MD
mechanism assembly) are for the limiting of current through a laser
diode.
Control method of the laser output power
The laser pick-up assembly provide the photo-diodes and APC
(Auto Power Control) circuit.
The photo-diode detect output of the laser diode then IC104 control
the APC circuit according to the signal voltage of the photo-diode via
IC101.
The Variable resistancer on the FPC in the Laser pick-up assembly
can be adjusted the output level of Laser diode to fix the rated output
level.
Laser Interlock Switch
The loading position detect switch S101 is set to " LOAD ON " (ON:
low level, OFF: high level) position, IC104 get the " LOAD " signal,
and hand the laser " LDON " signal to No. 9 terminal (LDON) of the
Laser pick-up assembly.
Then a laser diode can be lighted exept when the level of signal
"LOAD " is low.
∗ Refer to page 42.
MJ-D508
3