Sony PMW-500 Operation Manual page 137

MAINTENANCE
Menu items Sub-item
Audio CH3&4 AGC Mode Mono/Stereo
Makes settings related
to audio.
AGC Spec
Limiter Mode
Output Limiter
CH1 Wind Filter
CH2 Wind Filter
CH3 Wind Filter
CH4 Wind Filter
Audio SG (1KHz)
MIC CH1 Level
MIC CH2 Level
Settings
–6dB/–9dB/–12dB/
–15dB/–17dB
Off/–6dB/–9dB/–12dB/
–15dB/–17dB
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off/Auto
Side1/Front/Front+Side1 For recording input audio from the
Side2/Front/Front+Side2 For recording input audio from the
Description
For automatic adjustment of the
input level of analog audio signals
recorded on channels 3 and 4,
specifies whether to make the
adjustments separately for each
channel (Mono) or in stereo mode
(Stereo).
Selects the AGC saturation level.
For manual audio level adjustments,
selects the saturation level for the
limiter applied to loud input signals.
Select Off if you do not wish to use
the limiter.
Turns the audio output limiter on or
off.
Turns the channel 1 wind filter on or
off.
Turns the channel 2 wind filter on or
off.
Turns the channel 3 wind filter on or
off.
Turns the channel 4 wind filter on or
off.
Selects whether to output (On) or
not output (Off) a 1 kHz test signal
in color bar mode.
Auto: Output a test signal only
when the AUDIO SELECT
CH1 switch is set to AUTO.
front microphone on channel 1,
selects the knob that adjusts the
audio level.
Side1: The LEVEL knob (left) on
the side panel
Front: The MIC LEVEL control on
the front panel
Front+Side1: Adjust with both the
LEVEL knob (left) and the
MIC LEVEL control.
front microphone on channel 2,
selects the knob that adjusts the
audio level.
Side2: The LEVEL knob (right) on
the side panel
Front: The MIC LEVEL control on
the front panel
Front+Side2: Adjust with both the
LEVEL knob (right) and the
MIC LEVEL control.
Menu List 137