Planning Metadata Operations; Loading A Planning Metadata File Into Camcorder's Internal Memory - Sony PMW-500 Operation Manual
Solid-state memory camcorder
Hide thumbs
Also See for PMW-500:
- Operation manual (203 pages) ,
- Operator's manual (35 pages) ,
- Manual (13 pages)
Table of Contents
Advertisement
Planning Metadata
Operations
Planning metadata is information about shooting
and recording plans, recorded in an XML file.
Example of a planning metadata file
You can shoot using clip names and shot mark
names defined in advance in a planning metadata
file.
This unit can display clip names and shot mark
names defined in the following languages.
• English
• Chinese
• German
1)
• French
• Italian
• Spanish
1)
• Dutch
• Portuguese
• Swedish
• Norwegian
• Danish
1)
• Finnish
1) Some characters are displayed as different but similar
characters.
Note
If you define clip name and shot mark names in
languages other than the above, they may not be
displayed on the viewfinder screen or the LCD monitor
screen (with the display mode set to STATUS).
In the LCD monitor (with the display mode set to
STATUS), only alphanumeric characters and symbols
can be displayed.
Loading a Planning Metadata File
into Camcorder’s Internal Memory
To record planning metadata together with
recording clips, you need to load a planning
metadata file into the camcorder’s memory before
starting to shoot.
There are two ways to load files.
• Load a file that has been written to the following
directories on an SxS memory card or a USB
flash drive.
Recording
Media
Directory to which
mode
files are written
FAT
SxS memory
BPAV/General/Sony/
card
Planning
SDHC
PRIVATE/SONY/
BPAV/General/Sony/
Planning
UDF
SxS memory
General/Sony/Planning
card
USB flash
drive
• When a Wi-Fi connection is made between the
camcorder and a computer, operate the Web
menu built in the camcorder from the computer
to transfer a file.
For details on how to use the Web menu to load
a planning metadata file, refer to the
Supplement supplied in the CD-ROM (labeled
“Manuals for Solid-State Memory
Camcorder”).
To load a planning metadata file by menu
operation
Do the following procedures with OPERAION
>Planning Metadata in the setup menu.
To load a file in an SxS memory card
1
Insert an SxS memory card into the
memory card slot A or B, and set Load/
Slot(A) or Load/Slot(B) to [Execute].
A file list appears.
Note
The file list displays up to 64 files.
Even if the total number of planning metadata files
is 64 or less, all of the planning metadata files may
not appear if the directory where they are located on
the SxS memory card (General/Sony/Planning)
contains 512 or more files.
Page 85
Advertisement
Table of Contents
