Removing The Upper Burr; Replacing The Upper Burr; Replacing The Bean Hopper - Baratza Vario Operation Manual

Removing the Upper Burrs
The upper burr can be removed in
order to clean the burrs, however
it is imperative that there are no
coffee grounds on the mating sur-
faces when you replace the burr.
Any coffee grounds left between
the mating surface will affect the
calibration and the grinders ability
to grind fine.
To remove the burr, rotate the
metal burr carrier clockwise until it
stops then lift straight up and out
of the grinder housing. Clean the
burr using a stiff brush. Remove
any loose coffee grounds on both
the fixed burr and the lower burr
mounted within the motor housing.

Replacing the Upper Burr

While rocking the burr side to side,
push down firmly on the burr car-
rier to ensure that it seats properly.
Rotate the burr carrier counter-
clockwise until it stops.

Replacing the Bean Hopper

To replace the bean hopper, line
up the two small tabs on the base
of the hopper with their respective
slots.
Need Help?
For FAQ's or to troubleshoot a
problem, please see the Trouble-
shooting section at www.baratza.
com
10