Technical Specifications - D-Link DSL-2760U User Manual

Wireless n adsl2+ modem router
Table of Contents

Advertisement

D-Link DSL-2760U USER'S MANUAL
DEVICE INTERFACES
RJ-11 ADSL port
4 x RJ-45 10/100BASE-TX Ethernet ports with auto MDI/MDIX
2 x USB (Type A connector) ports
Built-in draft 802.11n wireless LAN
Factory reset button
WIRELESS LAN
802.11b/g standards, 802.11n draft 2.0
Wireless speed: up to 54Mbps (802.11g), 130Mbps (802.11n)
Frequency range: 2.4 GHz to 2.484G Hz
WEP 64/128 bits data encryption
WPA/WPA2 (Wi-Fi Protected Access) security
Multiple SSID
802.11e Wireless QoS (WMM/WME)
MAC address-based access control
ADSL STANDARDS
ADSL standards: Multi-mode, ANSI T1.413 Issue 2, ITU G.992.1
(G.dmt) Annex A, ITU G.992.2 (G.lite) Annex A, ITU G.994.1 (G.hs)
ADSL2 standards: ITU G.992.3 (G.dmt.bis) Annex A/L/M, ITU
G.992.4 (G.lite.bis) Annex A
ADSL2+ standards: ITU G.992.5 Annex A/M
ADSL DATA RATES
G.dmt: 8Mbps downstream, 832Kbps upstream
G.lite: 1.5Mbps downstream, 512Kbps upstream
ADSL2: 12Mbps downstream, 1Mbps upstream
ADSL2+: 24Mbps downstream, 1Mbps upstream
ATM & PPP PROTOCOLS

Technical Specifications

ATM Forum UNI3.1/4.0 PVC (up to 16PVCs)
ATM Adaptation Layer Type 5 (AAL5)
ATM QoS (Traffic Shaping)
Bridged or routed Ethernet encapsulation
VC and LLC based multiplexing
PPP over Ethernet (PPPoE)
PPP over ATM (RFC 2364)
ITU-T I.610 OAM F4/F5
ROUTER FEATURES
NAT (maximum 1024 NAT sessions)
DHCP server/client/relay
Static Routing, RIP v.1, v.2
Universal Plug and Play (UPnP) Compliant
Dynamic Domain Name System (DDNS)
Virtual Server
SNTP, DNS proxy and IGMP proxy
FIREWALL
Built-in NAT firewall
Stateful Packet Inspection (SPI)
DoS attacks prevention
Packet filtering (IP/ICMP/TCP/UDP)
Intrusion Detection System (IDS)
DMZ
VIRTUAL PRIVATE NETWORK (VPN)
Multiple PPTP/IPSec/L2TP pass-throughs
DEVICE CONFIGURATION/MANAGEMENT
120

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents