Table of Contents
Advertisement
Main Menu
Press TV MENU on the remote control to open the
Main menu, figure 1. See below for an overview of the
settings available through the Main menu.
Setup
Input Name
Identify the devices connected to the TV so that you can select them from the Device Selection menu.
Icon Order
Rearrange the icons in the Device Selection menu.
Channel
Captions
V-Chip Lock
Audio/Video
Downloaded from
www.Manualslib.com
Select English or Spanish for menus and on-screen displays.
Memorize the available channels for the antenna or cable service connected to the ANT 1 input.
Set the time for the TV manually or select Auto for the TV to automatically set the time based upon
Extended Data Service (XDS) time data (usually broadcast by your local PBS station).
Set the TV timer.
Reset the lamp reminder.
View the TV's software version.
Edit channels for the ANT 1 input.
For channels broadcast in both digital and analog formats, choose to watch only the digital version.
Manually add or delete channels from memory, name channels, or add your favorite channels to a
SQV (SuperQuickView™) list.
View signal strength of the currently tuned digital channel.
Display closed captions if sent by the broadcaster.
Select settings for analog or digital captions.
Block or allow programing based on rating signals sent by the broadcast station.
Lock the TV by time.
Lock the front-panel buttons.
Reset the A/V Memory to the original factory settings for a selected device.
Customize individual audio and video settings.
Display a blue screen when viewing a device with no signal.
Enable/disable Film Mode.
Turn the TV speakers on or off.
manuals search engine
Chapter 4. TV Menu Operations
Figure 1. Main menu, Setup selected
41
Advertisement
Table of Contents
