Table of Contents
Advertisement
32
Chapter 3. TV Operation
Choosing a Program Source
(Device Selection Menu)
Figure 1
Press DEVICE on the TV's remote control to open the
Device Selection menu (Figure 1). The Device Selec-
tion menu allows you to select an input for viewing. The
device or input currently displayed on the TV appears as a
gold-colored icon.
•
To assign meaningful labels to the icons, such as
"VCR" or "DVD," see the "Input Name" section of
chapter 4, "TV Menu Operations."
•
To rearrange the icons, see the "Icon Order" section
of chapter 4, "TV Menu Operations."
Figure 1. Device Selection Menu
Device Section
To select another device or input, press ADJUST
on the TV's remote to move the highlight. Press ENTER
to select the device to view and hear. The TV inputs are
automatically changed.
Video Section
The destination of the device highlighted in the Device
Section is displayed here as a TV icon.
Leave the TV powered off for a while each day
for the TV to receive ChannelView updates. The
updates may take from five to 15 minutes to
complete, depending on the number of channels
in memory. Program listings will be temporarily
lost if the TV loses power.
Downloaded from
www.Manualslib.com
Device
Section
IMPORTANT
manuals search engine
ChannelView™ Channel Listings
Figures 2 and 3
Press GUIDE while viewing ANT 1 to display a list of avail-
able memorized digital (D) and analog (A) channel infor-
mation (if available from the broadcaster).
ChannelView for digital channels shows the major channel
and sub-channels (or bitstreams). Analog channel infor-
mation is displayed as sent. Press ADJUST
scan through all the channels in memory one by one. To
cycle through the choices quickly, press CH
For detailed program information for digital channels, press
ADJUST
; to return to basic information, press ADJUST
. This information is sent by the broadcaster. If limited
data is shown or no program data appears, it is because
the broadcaster is not sending the information. This is not
a defect of your TV.
Figure 2. ChannelView screen, current programs. Use
ADJUST
to move between the displays for current
and future programs.
Figure 3. ChannelView screen, future programs on the
selected channel (digital channels only)
GUIDE and Devices
For satellite receivers and some cable boxes, when the
remote has been programmed for the device, GUIDE dis-
plays the on-screen programming guide for the receiver
or cable box. Press ADJUST
navigate the displayed Guide.
or
to
or
.
and ENTER to
Advertisement
Table of Contents
