Port Filtering Panel: Enabling Port Filterings - NETGEAR Mingle 3C4C38D7 User Manual

●
If incoming traffic was not routed as a result of the above:
§
If DMZ is enabled, then incoming traffic is routed to the computer that uses the IP
address specified by the DMZ settings.
§
If DMZ is not enabled, the incoming traffic is blocked.
Note: Putting a computer in the DMZ opens all the ports of that computer, and exposes that
computer to various security risks. Use this option only as a last resort — if possible, use other
options instead (for example, port forwarding).
Enabling DMZ
Before you can use or configure DMZ, you must enable it.
1. Log in to the home page. (See
2. Click Settings > Router > Basic.
3. Next to DMZ Enabled, select On.
4. Click Submit.
Configuring DMZ
Specify which computer is to receive all unsolicited incoming connections.
Note: DMZ must currently be enabled. (See
1. Log in to the home page. (See
2. Click Settings > Router > Basic.
3. In the DMZ Address, enter the IP address of the computer that you want exposed to the
Internet. (If you don't know how to find the IP address, see
4. Click Submit.

Port Filtering Panel: Enabling Port Filterings

Before you can use or configure Port Filtering, you must enable it.
1. Log in to the home page. (See
2. Click Settings > Router > Port Filtering.
3. In the Port Filtering list, select Black List to prevent specific applications from using the
Internet, or White List to allow only specific applications to use the Internet.
4. Click Submit.
Device Settings
Logging In as an Administrator.)
Enabling DMZ.)
Logging In as an Administrator.)
Logging In as an Administrator.)
Finding the IP Address.)
79