Table of Contents
Advertisement
4. About RS-232C
Supported models
This section shows the models that are supported by the commands registered in the unit,
and the models that correspond to the model data that is supplied with the programming
tool.
■ Supported models (as of February 2010)
1. Initial setting
SANYO：LP-XW200 / LP-XW250 / LP-XW300 / *LP-XW60 / *LP-XW65 / *LP-WXL46
HITACHI：CP-X308J / CP-X417J / CP-X3010J / CP-X2510J
NEC：NP600SJ / NP500WSJ / NP215J / NP210J / NP115J / NP110J
EPSON：EB-410W / EB-826W / EB-825 / EB-85
SHARP：PG-F255W / PG-F312X / PG-F212X
Canon：LV-7375 / LV-7370 / LV-7275 / LV-8300
EIKI：LC-XS25D / LC-XS30D / *LC-XB42D
InFocus：IN2100 / IN2104EP
2. Supplied data
3M：MP8745
BenQ：MP623
MITSUBISHI：LVP-WD510 / *XD250U / *XD280U
Optoma：EX525ST / EX530
Panasonic：PT-LB78V / PT-LB90 / PT-LB90NT / PT-LB75V / PT-LB51NT
For the information registered in the model data, see "Command tables" on p.24.
For the pin assignment of the projector, see "RS-232C connector" on p.26.
* These projectors use the supplied RS cable's MiniDIN8.
Caution
9
Advertisement
Table of Contents
