Page 2
1. Set the controls • Set volume and notch off. Set the bass, middle, treble and brilliance controls to center. 2. Plug in • Connect the Presys Plus to an amplifi er or PA with a ¼-inch instrument cable. The battery light (batt) will fl ash once quickly to indicate it has switched on.
Page 3
Replace the battery by fl ipping open the preamp body using the latch eliminated. located above the Fishman logo. Be sure to observe the correct polarity during this installation.
Page 4
Sample EQ Settings Fingerstyle “Scooped” Mid Strummer Cut Through the Mix This will add fullness to the bass This setting emphasizes extreme bass A good setting for strumming chords. When you need to be heard through a and defi nition to the treble. and treble loud band.
Consult the dealer or an experienced radio/TV technician if help is needed with interference. NOTE: FMIC and Fishman Transducers, Inc. are not responsible for unauthorized equipment modifi cations that could violate FCC rules, and/ or void product safety certifi cations.