Additional Options; Adjusting Aspect Ratio; Using The Keystone Function - LG PF80G Owner's Manual

Additional Options

Adjusting Aspect Ratio

Press the SETTINGS button on the
y
remote control. Select PICTURE →
Aspect Ratio to change the aspect
ratio.
You can also use the Q.MENU or
y
RATIO button.
Menu
16:9 Resizes images to fit the
screen width.
Just Displays video images in
Scan the original size without
removing parts of the edge
of the image.
In HDMI/Component (over
y
720p) mode, Just Scan
is available.
Set By Changes the aspect ratio to
Program 4:3 or 16:9 depending on
the input video signal.
4:3 Resizes images to the
previous standard 4:3.
Zoom Resizes the image to fit the
screen width. The top and
bottom parts of the image
may be cut off.
Cinema Choose Cinema Zoom when
Zoom 1 you want to enlarge the
picture in correct proportion.
NOTE
Available picture size may differ
y
depending on the input signal.
The screen aspect ratios on HDMI-
y
PC input are available in 4:3 and
16:9 only.
Description
Using the PROJECTOR
Using the Keystone
Function
To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set up at a right
angle to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
• Keystone 0 <
-
Close
1
Press the Key's
button to adjust the picture.
y Keystone can be adjusted
from -40 to 40.
2
Press the OK button when done.
23
>
+
or Key's