Sony TRINITRON KV-34DRC430 Service Manual page 17

ECG WIRE DRESSING (KV-36DRC430 ONLY)
2-022-978-01
Wire Clip (2 Places)
NOTE: Leads are
dressed inside
Rotation Coil.
ECG - P/N
1-900-808-30 - 30 WCRT
1-900-808-31 - 34W CRT
ECG WIRE DRESSING (KV-34DRC430 ONLY)
Caution Points:
1. Make sure braided ECG wire loop does not
twist, and stays flat on CRT surface.
2. Do not pull excessively on the tension spring.
3. If the spring appears warped or stretched,
replace entire parts. The braided ECG wire
CANNOT sag on the CRT, and must remain
under tension.
Earth Coating
Ground Wire (ECG)
32": 1-900-808-29
36": 1-900-808-28
KV-34DRC430/36DRC430
NOTE2: There are
2 Leads (TOTAL 4
Wires) to connect
to CH-Board
Rotation
COIL
DY
SPRING (2 places)
Integral part of
the Ground wire
CRT BRKT
(Earth Coating Ground)
NOTE: Leads are
dressed inside
Rotation Coil.
Rotation
DY
COIL
CRT BRKT
NOTE2: There are
2 Leads (TOTAL 4
Wires) to connect
to CH-Board
Integral Spring
2-Places
KV-34DRC430/36DRC430
17