Install spring sheath.
Wipe clean the spilled oil.
弹簧护套:Spring sleeve
Install the clutch-pressing spring and clutch on the driven
wheel.
Use
clutch
spring
pressing
combination.
After
the
compression, the lock nut should be installed.
Attentions:
The spring should be compressed appropriately, otherwise it
would be damaged.
扳手:Wrench
离合器弹簧压缩器:Clutch spring compressor
14.7 Assembly
The assembly of driving plate/ clutch / driven wheel should be in the reverse order of disassembly.
14.8 Feet start mechanism
Disassembly/Checking
Remove the left crankcase cover
Loosen screws and remove the baffle.
Remove start claw components
Remove start-axis components
Check the wear of start shaft.
Check the wear situations of start bushings and force
part of idler shaft
- 139 -