Panasonic DMR-ES30VEG Service Manual page 23

Mode name
RAM Drive Last Error RAM Drive error code display.
*For details about the drive error code, refer
to the Service Manual for the specific RAM
Drive.
*Details are described in
"11. (DVD) Service Explorer".
Delete the Last Drive Delete the Last Drive Error information
Error stored on the DVD RAM-Drive.
Turn on all FL/LEDs All segments of FL and all LEDs are turned
on.
PB HIGH Signal Output 8 pin of AV 1 Jack (PB HIGH terminal) is
High (approx. 11V DC).
PB MIDDLE Signal 8 pin of AV 1 Jack (PB HIGH terminal) is
Output Middle (approx. 5.5V DC).
Front connection Press all front keys and check the
inspection connection between Main P.C.B. and Front
P.C.B.
Item
Description
FL display
1. Error Number is displayed for 5
seconds.
2. Time when the error has
occurred is displayed for 5
seconds.
Y: Year
MM: Month
DD: Day
hh: Hour
mm: Minute
3. Last Drive Error (1/2) is
displayed for 5 seconds.
4. Last Drive Error (2/2) is
displayed for 5 seconds.
5. Error occurring Disc type is
displayed for 5 seconds.
6. Disc Maker ID is displayed for 5
seconds.
7. Factor of Drive Error occurring is
left displayed
All segments are turned on.
(1) Each time a key is pressed,
segment turned on increases one
by one.
(2) Total umber of keys that have
been pressed.
23
DMR-ES30VEG / DMR-ES30VEC / DMR-ES30VEB
Key operation
(Remote controller key)
Press [4] [2] in service mode.
Then press [0] [1] ~ [9] [9], the
past 99 errors are displayed.
In case that the supplier cannot be
identified, display is black out.
Press [9] [6] in service mode.
Press [5] [1] in service mode.
Press [5] [2] in service mode.
Press [5] [3] in service mode.
Press [5] [4] in service mode.