Parts Ldentification - Smartek ST-X500 Instruction Manual

IDENTIFYING THE STEAM PRESS PARTS
1. The Pressing Handle raises and lowers the Pressing Plate. By
lowering the Pressing Handle until it reaches the lowest point
possible you automatically obtain maximum pressure.
2. The Locking Knob will lock together the Pressing Plate and Ironing
Board. Use the Locking Knob to carry or Store the Steam Press.
3. The Steam Burst Button on the end of the handle grip produces a
burst of steam when pressed.
4. The Pressing plate is the temperature controlled surface that heats
and presses the fabric.
5. The Ironing Board is the padded surface that holds the fabric during
pressing.
6. The Power Indicator Light is illuminated when the unit is on.
7. The On/Off Switch can be pushed to turn the power on and off.
8. The Ready Light goes off when the Press has reached the selected
temperature.
9. The Steam Ready Light goes on when unit is ready to produce
bursts of steam.
Steam press Instruction Manual
10. The Temperature Control dial is used to set the desired
temperature for each fabric.
11. The Water Tank slides forward and is filled through holes in the
top. The Water Level can be seen through the front of the tank.
Slide the tank forward for a better view.
Page3