Steam Iron Operating Instructions Model No. ST-1200 Safety Information PRECAUTIONS --------------------------------------------------------------------------2 IMPORTANT SAFETY INSTRUCTIONS-------------------------------------------2-4 Operation COMPONENTS IDENTIFICATION --------------------------------------------------5 HELPFUL IRONING TIPS -------------------------------------------------------------6 HOW TO FILL-----------------------------------------------------------------------------7 HOW TO USE AS A STEAM IRON--------------------------------------------------7 HOW TO USE AS A DRY IRON------------------------------------------------------8 HOW TO USE THE SPRAY FEATURE AND BURST OF STEAM ---------8 Maintenance HOW TO CARE FOR YOUR IRON--------------------------------------------------9-10 General Information...
Thank You for purchasing a Smartek Iron IMPORTANT SAFETY INSTRUCTIONS Your iron is an appliance to be used only for ironing fabrics on...
Page 3
READ ALL INSTRUCTIONS BEFORE USING THE IRON 1. Use the iron only for its intended purpose, for ironing fabrics on board. 2. To protect against burns or injury to persons, do not iron or steam fabrics while being worn on the body. 3.
Page 4
To reduce the WARNING risk of electric shock or fire 1. Do not operate another high wattage appliance on the same circuit, to avoid a circuit overload 2. If any extension cord is absolutely necessary, use a cord rated a minimum of 10 amperes •...
COMPONENTS IDENTIFICATION FEATURES: Cord protector Temperature indicator Temperature control dial Spray button Power steam button Variable steam control Water filling inlet Spray Nozzle Transparent water tank Teflon coating plate - 5 -...
READ THIS INSTRUCTION BOOK THOROUGHLY BEFORE USING YOUR SMARTEK IRON TO BECOME FAMILIAR WITH THE IRON FEATURES. HELPFUL IRONING TIPS The Temperature Selector Dial of the Smartek iron has dots. The dots are symbols for 3 temperature ranges: Low Temperature Medium Temperature...
HOW TO FILL WITH WATER Make sure the iron is turned off and the AC Power Cord is unplugged from the electrical outlet. 1. Set the Variable steam knob to the ‘0’ position before filling the iron with water. 2. Open the Water Fill Opening and fill the Tank up to the “MAX” Line on the tank.
HOW TO USE THE SPRAY Before using the spray feature, check the fabric label for ironing instructions because some fabrics may be spotted or stained with moisture. The spray feature is particularly helpful for removing stubborn wrinkles and where extra dampening is needed. The spray may be used with steam or dry ironing.
AFTER EACH USE 1. Turn the iron off and unplug. 2. Empty the iron immediately after using. Do not store the iron with water in it. 3. Wait until the iron has cooled before storing it, and always set it on the Heel Rest to protect the soleplate from scratches, corrosion or stains.
Page 10
MAINTENANCE: SELF CLEANING IMPORTANT: Your iron will give the best ironing results and last longest if you apply the Self Cleaning once a month. 1. Fill the water tank up to half with water. 2. Position the iron on its rear heel. 3.
FABRIC IRONING CHART Check fabric for specific ironing instructions, always follow manufacturer’s instructions. Iron blended fabrics at setting for lower-temperature fiber or for the highest –percentage fibers Use caution, some synthetics may melt at high temperature Temperature Fabric Ironing Recommendations Selector Setting *Nylon Dry iron on wrong side, or use a...
1 YEAR LIMITED WARRANTY All Smartek Products have a warrantee for 1 year from provable date of purchase against defects in material and workmanship. During this period such defects will be repaired, or the product will be replaced without charge.