Subscribe to Our Youtube Channel
Related Manuals for Smartek ST-2000N
Summary of Contents for Smartek ST-2000N
- Page 1 Cord Cordless Iron Model # ST-2000N Operating Instructions READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE IRON...
- Page 2 SAFE USE OF THE IRON When using your iron, basic safety precautions should always be followed: 1. Before using your appliance check and ensure that the voltage of the power socket is the same as the rating marked on the iron. 2.
- Page 3 SAFE USE OF THE IRON CONT. 14. Although the power plug has been disconnected, the remaining temperature can produce steam. After using the appliance, put iron in a place where children cannot reach. Empty the remaining water from the water tank and store it only when iron is completely cooled (about half hour after the iron is unplugged).
-
Page 4: Components Identification
COMPONENTS IDENTIFICATION Pilot Light Locking Stand Water Tank 3-Position Switch Soleplate Cordless Ironing Spray Nozzle Locked Position Water Filling Inlet With Cap Corded Ironing Steam Control (variable) Power Cord Protector Spray Button Power Unit Steam Burst Button Soft Touch Grip Temperature Control Dial... -
Page 5: How To Use Your Iron
HOW TO USE YOUR IRON Note* It is normal for a small amount of smoke to be produced the first time, this will quickly disappear. When using the steam function for the first time, do not direct the steam toward the laundry, as there could be debris from the steam vents. - Page 6 SYNTHETICS SILK WOOL LINEN COTTON Synthetiques Sole/lanie Toile/cotton Chemiefasem Seied/wolle Leinen/baumwolle Note: If the fabric consists of various kinds of fabrics, always select the temperature required by the most delicate fabric. CORDED OR CORDLESS USE CORDED IRONING: • Set the 3-position switch to position (3). •...
-
Page 7: Dry Ironing
DRY IRONING • Make sure the steam control is set to position “0” (no steam) and proceed to “Steam Ironing”. • Any temperature may be used depending on the garment. • You do not need to put water in the water tank when dry ironing only. •... -
Page 8: Anti Drip System
STEAM BURST • Make sure the steam control is set to position “0” (no steam). • Press the steam burst button to release an intense shot of steam from the soleplate to remove stubborn creases in heavy materials. • After using for about 25 seconds, put the iron on the stand until the pilot light turns off. - Page 9 1 Year Limited Warranty Smartek warrants this product free from defects in material and workmanship for 1 year from date of purchase. Within this warranty period, Steam-X will repair or replace, at its option, defective parts at no charge, provided the product is returned freight prepaid with proof of purchase.
Need help?
Do you have a question about the ST-2000N and is the answer not in the manual?
Questions and answers