E X I S T I N G C O N S T R U C T I O N
HTI6, HTI8
Remove the grille from the
speaker frame.
Cut the dry wall.
Screw down each of the four
Phillips head screws. The
locking tabs will swivel into
place and secure the unit to
the rear surface of the drywall.
Determine the correct
speaker location.
Connect the speaker wires
to the speaker.
Replace the metal grille.
Level
1/2"
Template
Note: Always allow at least
one-half inch between a wall
stud and the speaker cutout or
the locking tabs will not be able
to swivel into place.
Place the frame assembly
in the wall.
1/2"
1/2"
5