Table of Contents
Advertisement
7. Insert the two tabs 1 on the new front fan assembly bracket into the
Figure 30. Installing the new front fan assembly bracket
8. Connect the front fan assembly cable to the front fan connector on the system
36
User Guide
corresponding holes in the chassis, and then press the two tabs through the
holes until the bracket is secured in place.
board. See "Locating parts and connectors on the system board" on page 11.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the installation or replacement, go to "Completing the parts
replacement" on page 40.
Advertisement
Table of Contents
