Table of Contents
Advertisement
b. If the card is held in place by a retaining latch, press the card retaining latch
1 as shown to disengage the latch. Grasp the card and then gently pull it
out of the slot.
5. Remove the new PCI card from its static-protective package.
6. Install the new PCI card into the appropriate slot on the system board. See
"Locating parts and connectors on the system board" on page 11.
Figure 17. Installing a new PCI card
7. Reinstall the PCI card holder into the chassis. See "Removing and reinstalling
the PCI card holder" on page 16.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the installation or replacement, go to "Completing the parts
replacement" on page 40.
Chapter 2. Installing or replacing hardware
23
Advertisement
Table of Contents
