Hitachi 50V500 Operating Manual page 65

SETUP
Set The Inputs
THUMB
STICK
Press THUMB STICK
Press down on THUMB STICK to select desired input name.
Select Reset to set video names to original factory preset condition.
Video 2 Auto Link
Setup
Set The Inputs
Video1
Video2
Video3
Video4
Video5
Use THUMB STICK
When Auto is selected, the TV will turn on and tune to Video2 automatically, when the Video2 input device is turned on. This is con-
venient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When Remote is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on and the
VCR, laserdisc, or DVD play button on your remote control is pressed.
This is convenient when you want to record a movie with your VCR and watch it later.
Select Off to disable this function.
Press EXIT to quit menu.
1. Once the TV has been turned on using the Auto Link feature, it must be reset before Auto Link is used again. To do
NOTES:
this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described
above.
2. When using Remote mode, any remote control button will substitute for your video input device play button. However,
intended operation is for use with your VCR, laserdisc, or DVD play button.
3. If no remote control button is pressed after the TV is turned on by Auto Link, the TV will automatically turn off after
three hours.
Downloaded from www.Manualslib.com
Use this feature to give a name to any of the five video inputs.
Setup
Menu Preference
Screen Saver
Set The Clock
Set The Inputs
Set The Color System
Set Black Side Panel
Set Event Timer
Set Closed Captions
Move SEL Select
, , , , to highlight the name of the video inputs.
Use this function to automatically turn the TV on and tune to Video2 when it detects a video signal to
input 2.
Rename List
AVR DVD PVR2 VCR
CAM DVD2 SAT VCR2
CBL LD STB
CBL2 PVR STB2 Reset
Return
Move SEL
, , or , then press down on THUMB STICK to change Auto Link setting.
manuals search engine
Setup
Set The Inputs
Video1
Video2
THUMB
STICK
Video3
Video4
SELECT
Video5
Move
Setup
Set The Inputs
Video1 Rename List
THUMB Video2 AVR
STICK
Video3 CAM
Video4 CBL
Video5 CBL2
Auto Link
Auto
Return
Move SEL
65
Rename List
AVR DVD PVR2 VCR
CAM DVD2 SAT VCR2
CBL LD STB
CBL2 PVR STB2 Reset
SEL Return
DVD
DVD PVR2 VCR
DVD2 SAT VCR2
LD STB
PVR STB2 Reset
Remote Off